Product Care And Storage; Troubleshooting - Lupine Piko TL Max Bedienungsanleitung

8

Product care and storage

Cleaning:
Only clean the light with closed charging socket. If required, use warm water
and add some dishwashing detergent. After cleaning, open the charging
socket in order to make it possible to dry out, just in case water has entered.
Transport:
Attention! When transporting in a backpack or suitcase, activate the double click
function to prevent the lamp is started accidentally.
The uncontrolled heat buildup could cause a fire or melt adjacent plastic material.
Storage:
When the lamp will not be used for a longer period, fully charge the battery and
store it at a cold place (basement etc.). You can also leave it connected to the
charger.
34 Piko
Problem: Ursache:
The light does not come on Deep discharged battery.

and the button's LEDs do
not flash.
The power LEDs do not come Faulty LED unit.

on, the button's LEDs flash.
The battery life is too short. Discharged battery.

 Old battery.
 Very low temperatures.
 Faulty charger.

Troubleshooting

Solution:
Charge the battery.

Replace the LED unit.

Charge the battery.

 Replace the battery.
 Keep the battery warm.
 Replace the charger.
Piko
9
35