State: forwarding
Port id: 128.15
Type: P2p (configured: Auto) Internal Port Fast: No (configured: No)
Designated bridge Priority : 32768
Designated port id: 128.15
Guard root: Disabled
Number of transitions to forwarding state: 2
BPDU: sent 483, received 1037
console# show spanning-tree ethernet 1/e15 instance 12
Port 1/e15 enabled
State: discarding
Port id: 128.15
Type: P2p (configured: Auto) Internal Port Fast: No (configured: No)
Designated bridge Priority : 32768
Designated port id: 128.11
Guard root: Disabled
Number of transitions to forwarding state: 3
BPDU: sent 482, received 1035
Definieren von STP-LAG-Einstellungen
Verwenden Sie die Seite Spanning Tree LAG Settings (Spanning-Tree-LAG-Einstellungen), um STP-Parameter für aggregierte Ports zuzuweisen. So öffnen Sie
die Seite LAG Settings: Klicken Sie in der Strukturansicht auf Switch→ Spanning Tree→ LAG Settings.
Abbildung 7-24. Spanning Tree LAG Settings (Spanning-Tree-LAG-Einstellungen)
Role: designated
Port cost: 19
Address: 00:00:00:16:00:64
Designated path cost: 4
Role: alternate
Port cost: 19
Address: 00:00:b0:07:07:49
Designated path cost: 0