Tecsis S4150 Betriebsanleitung Seite 17

7. Starting, operation
Mechanical connection
For the installation, the following torque moments
may not be exceeded:
G1/4, G1/4i, 1/4NPT, R1/4:
G1/8, 1/8NPT, R1/8, M10x1:
Horizontal flange:
For pressure switches with straight thread the sealing ring is included in delivery.
„
When mounting the instrument, ensure that the sealing faces of the instrument and
„
the measuring point are clean and undamaged.
Screw in or unscrew the instrument only via the flats using a suitable tool and the
„
prescribed torque. The appropriate torque depends on the dimension of the pressure
connection and on the sealing element used (form/material). Do not use the case as
working surface for screwing in or unscrewing the instrument.
When screwing the pressure switch in, ensure that the threads are not jammed.
„
Betriebsanleitung / Operating manual
20-25 Nm
15-20 Nm
6-8 Nm
Product label (example)
Article no.
Pin assignment
Article no.
Adjustment range
GB
Preset switching
point and
pressure direction
Maximum values
for system pressure
and temperature,
power and voltage
Pin assignment
17