A Quick Overview For You; Signs, Symbols And Abbreviations; Function - Tecsis S4150 Betriebsanleitung

2. A quick overview for you / 3. Signs, symbols and abbreviations / 4. Function

2. A quick overview for you

If you want to get a quick overview, read Chapters 3, 5, 7 and 10. There you will get some short
safety instructions and important information on your product and its starting. Read these
chapters in any case.

3. Signs, symbols and abbreviations

Potential danger of life or of
!
severe injuries.
Warning
Potential danger of life or
of severe injuries due to
catapulting parts.
Warning

4. Function

This pressure switch is a signal converter. It opens or closes an electrical circuit if the system pres-
sure reaches a previously adjusted switch point. Thus it converts the pressure of fluids in electrical
switching signals. A membrane or a piston inside the pressure switch is moved in dependence
of the pressure of the medium. The diaphragm deflection and the piston stroke are a function of
the pressure and the preload the spring. At the switching point, i.e. at a defined deflection of the
diaphragm, or a defined stroke of the piston, an electric contact is opened or closed. The switching
point is set within different pressure ranges by means of an adjustment screw. This can be done
ex-factory or on-site.
14 Betriebsanleitung / Operating manual
Notice, important informa-
tion, malfunction.
The product complies with
the applicable European
directives.
GB