Cleaning And Maintenance; Troubleshooting; Repair & Maintenance - Concept VA0030 Bedienungsanleitung

EN
A) Automatic mode
Having exhausted the air, leave the ON/OFF button on. The vacuum pump is activated again automatically, if any air
is sucked into the bowl.
B) Manual mode
When the air is exhaused, switch the ON/OFF button to off position. To activate the vacuum pump, switch the button
on again.
Use of box with batteries:
1. Remove the battery cover (9) in the bottom of the bowl.
2. Place 4 pieces of D batteries of 1.5 V according to +/- polarity indicated.
3. Fit the battery cover back in its place and then follow the instructions stated in „Use of bowl with AC adapter",
starting from item 3.

CLEANING AND MAINTENANCE

Clean the appliance regularly according to the frequency of its use to prevent accumulation of foodstuff remains
and generation of unpleasant odour.
Use a clean damp cloth for cleaning.
Never rinse or immerse the appliance in water or other liquids.
The vacuum pump must always be kept clean. Before each use, make sure the filter is not clogged with foodstuff
remains.
The appliance is not to be cleaned in a dishwasher or heated in a microwave oven!

TROUBLESHOOTING

1. If the appliance does not work, check the following:
Is the AC adapter connected properly?
Are the batteries inserted correctly?
Are batteries discharged?
Are there any foodstuff remains in the vacuum pump or its filter?
2. If the appliance still does not work, try the following:
Turn on the appliance using the ON/OFF button and press the bowl lid gently with both hands
until the vacuum pump stops working.
If the pump motor does not stop working, even though there is no air left in the bowl, the problem may be caused
by old batteries.
The manufacturer, importer and seller are not liable for damages arising from breach of the appliance operating
instructions.
REPAIR & MAINTENANCE
Any extensive maintenance or repair that requires access to the inner parts of the product must be performed by an expert
service centre.
VA0030 19