Marmitek silverline 8 Gebrauchsanleitung Seite 8

1. Press and hold SETUP until the LED indicator lights steadily.
Release the SETUP button.
2. Press and release the X-10 button.
3. Enter 014 to control an IR Mini Controller, 013 for standard
Marmitek X-10 control. The LED turns off after the last digit
entered.
Controlling your equipment from any place in your home
Your remote is prepared to work together with the Marmitek
Powermid receiver. With this receiver its possible to control audio
and video equipment from another room or even outside the
house, using your Marmitek 8 in 1 remote control. Just plug the
receiver into the wall socket and place it in line of sight of your
equipment. Ask your dealer for more information.
Troubleshooting
The remote won't control your A/V equipment, or does not work at
all
•
Use manual controls or the original remote control to confirm
the equipment is working properly.
•
Be sure you pressed the device key for the device you want to
control.
•
Try finding the code for your equipment using "Searching for
codes" method.
•
Check the polarity of the batteries.
•
Replace the batteries.
8
E
NGLISH