Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.
Press CHANNEL+ repeatedly until the device to be controlled
changes channel. If you go past the code accidentally press
REW [<<] to step back (for first step push button twice).
5.
Press and release the ENTER button to complete the set-up.
Note: You may have to press CHANNEL+ many times (50+). If the
device does not have a Channel Up function, use the PLAY [>]
button (VCR only) or the POWER button.
Identifying codes found using the search procedure:
1.
Press and hold SETUP until the LED indicator lights steadily.
Release the Set-up button.
2.
Press the mode button that matches the equipment you wish
to identify. The LED blinks once.
3.
Press and release SETUP. The LED blinks once.
4.
To find the first digit, press each number button from 0 to 9 until
the LED blinks. The number you pressed is the first digit of the
code.
5.
Press each number button from 0 to 9 as above to find the
second digit.
6.
Press each number to find the third digit. When the third digit
has been found, the LED will go out. Write down the found
code on the label of the battery compartment.
Learning
Your Marmitek 8 in 1 remote has the codes for most TV's, VCR's etc.
in its code library. However, if the code for your particular device is
not found in the library, you can learn these codes from your
existing remote. Or if you find a code from the tables in this manual
that "almost" matches your device, but a few buttons are missing,
you can learn just those buttons.
Learning commands:
1.
Point your existing remote at the Marmitek 8 in 1 remote (front
to front) with a distance of about 5 centimetres between the
remotes.
2.
Press and hold SETUP until the LED indicator lights steadily.
3.
Press the mode button that matches the equipment you wish
to learn. The LED blinks once.
4.
Press and release the LEARN button. The LED blinks once.
5.
Press and release the button on the Marmitek 8 in 1 remote
that you want to teach. The LED blinks once. (Press SHIFT first to
learn a shifted function).
6.
Press the button on your existing remote that you want to
learn. Hold the button until the LED on the Marmitek 8 in 1
remote blinks off shortly.
7.
Repeat steps 5 and 6 for each button you want to learn.
8.
When you're finished learning all the keys, press ENTER.
5
E
NGLISH
Werbung
