Marmitek silverline 8 Gebrauchsanleitung Seite 3

0 .. 9:
Used as your original remote and to enter device codes.
[8] A · B:
Used for toggle functions (pre-programmed mode).
[9] Ent (Enter):
Used in conjunction with the numeric keys for direct channel
tuning. In set-up mode used to confirm.
[10] Info:
Works in the same way as your original remote.
[11] Channel:
Works like your original remote. Also used to switch Marmitek X-10
Home Automation Modules on and off.
[12] Mute:
Works the same way as your original remote. Also used to switch all
Marmitek X-10 Home Automation Modules off.
[13] Volume:
Works like your original remote. Also used to brighten and dim
lamps connected to Marmitek X-10 Lamp Modules.
[14] Teletext HOLD:
Holds the current page.
[15] L1, L2:
Lets you learn additional keys from your original remote.
[16] Teletext MIX:
Mixes the text with the TV program on the background.
[17] Play, FF, Stop, Rew, Pause:
Works the same as on your original remote. Also function as fast
text colour keys.
[18] Teletext ON.
[19] REC:
Record button. Works the same as your original VCR remote. You
must press the REC button twice to begin recording.
[20] Teletext OFF.
Clearing the memory (recommended on first set-up):
1. Press and hold SETUP until the LED indicator lights steadily.
Release the SETUP button.
2. Press and release the LEARN key twice.
3. Press the SETUP key. The LED will turn off after a few seconds.
4. All code entries and learned command entries are now
cleared.
Setting up for TV, VCR, Cable, CD and Satellite Receiver
3
E
NGLISH