Trial After Installation; Maintenance And Winterizing - Peraqua 7300714 Installations- Und Benutzerhandbuch

2.3. Trial after installation

Please check all the wirings carefully before turning on the heat pump.
2.3.1．Inspection before use
 Check installation of the whole heat pump and the pipe connections according to the
pipe connecting drawing;
 Check the electric wiring according to the electrical wiring diagram and earthing
connection;
 Make sure that the main power is well connected;
 Check if there is any obstacle in front of the air inlet and outlet of the heat pump
2.3.2．Trial
 The user is advised to start the water pump before the heat pump, and turn off the heat
pump before the water pump for long life circle.
 The user should start the water pump, and check for any leakage of water; Power on
and press the ON/OFF button of the heat pump, and set desired temperature in the
thermostat.
 In order to protect the heat pump, the heat pump is equipped with start delay
function. When starting the heat pump, the fan will start to run in 3 minutes, in another
30 seconds, the compressor will start to run.
 After pool heat pump starts up, check for any abnormal noise from the heat pump.
 Check the temperature setting

2.4. Maintenance and winterizing

2.4.1 Maintenance
The maintenance should be carried out once per year by qualified professional
technician.
 Cut off power supply of the
heat pump before cleaning,
examination and repairing .
Do not touch the electronic
components until the LED
indication lights on PCB turn off.
 Please clean the evaporator with household detergents or clean water, NEVER use
gasoline, thinners or any similar fuel.
 Check bolts, cables and connections regularly.
For installers and professionals
- 14 -