Daily Maintenance And Winterizing - Peraqua 7300714 Installations- Und Benutzerhandbuch

Smart mode as default will be activated when heat pump is on, and screen shows
①
② Press to enter Silence Mode
(Suggestion: select Smart mode for initial heating)
5. Defrosting
a.Auto Defrosting: When heat pump is defrosting,
flashing.
b.Compulsory Defrosting: When heat pump is heating, press
compulsory defrosting, and
(Note: Compulsory defrosting intervals should be more than 30 minutes and the compressor should run for
more than 10 minutes.)

2.3. Daily maintenance and winterizing

2.3.1. Daily Maintenance
Please don't forget to cut off power supply of the heat pump
 Please clean the evaporator with household detergents or clean water, NEVER use
gasoline, thinners or any similar fuel.
 Check bolts, cables and connections regularly.
2.3.2. Winterizing
In winter season when you don't swim, please cut off power supply and drain water out
of the heat pump. When using the heat pump under 2℃, make sure there is always
water flow.
, and screen shows
will be flashing. After defrosting,
Unscrew the water union of inlet pipe
to let the water flow out.
When the water in machine freezes in
winter season, the titanium heat
exchanger may be damaged.
- 8 -
.
will be flashing. After defrosting,
and
will stop flashing.
Important:
For users
.
will stop
together for 5 seconds to start