Installation - Loewe Multiroom Display Bedienungsanleitung

Start-up
Thank you
for choosing a Loewe product. We are happy to welcome you as our customer.
Loewe offers you the highest technological standards, the best design and
optimum user-friendliness. This applies to all our products.
You can use Multiroom Display to control the audio play functions of a
Loewe Multiroom Receiver from a stationary position on the wall. There are
two versions available. The Multiroom Display on Wall has an integrated
battery. This makes you completely flexible, e.g. in case of an upgrade, with
regard to wall mounting in the room, since it is not necessary to have a 230 V
mains connection directly at the installation position. The Multiroom Display
in Wall is shipped with a power supply, which has to be integrated in an
electrical installation socket. Thus (e.g. in the case of new buildings, with
suitable planning), a continuous power supply is possible without recharging.

Installation

Install the Multiroom Display in accordance with the accompanying instal-
lation instructions.
Follow the safety instructions in it without fail, as well as the safety instruc-
tions on page 26.
Charging the in-built battery
The battery in the Multiroom Display on Wall (Variant 70990U00) is already
installed ex-factory. Before the first use, the appliance must be charged for
about 3 h. As soon as the battery is fully charged, a corresponding message is
displayed. If the battery is discharged, a corresponding message is displayed.
Then, repeat the charging process. To do so, connect the accompanying wall
power supply with the mini-USB plug to the USB socket on the underside
of the Multiroom Display on Wall. You can also operate the Multiroom
Display on Wall during the charging process.
5RRP WHUPLQDO
%DWWHU\
5HFKDUJH
5HFKDUJH
3RZHU LV ORZ
&KDUJLQJ LQ
5HFKDUJH QRZ SOHDVH
SURJUHVV 
5RRP 
 
5RRP 
 
Example: Multiroom Display on Wall
17 -