Werbung
Tonalité d'activation de touches
• Lorsque vous appuyez une seconde fois sur la touche de sélection d'appareil (8),
la tonalité d'activation de touches s'active ou se désactive. Ceci est visible sur la
touche POWER au dessus de l'affichage (12) correspondant.
Adaptation de la zone à touches de commande
Lorsque vous programmez les différentes instructions de vos télécommandes origi-
nales, nous vous recommandons d'adapter la surface de l'afficheur aux touches de
vos télécommandes originales.
Appuyez pendant env. 6 secondes sur la
touche de sélection d'appareil (8) dont
vous voulez modifier l'affichage, jusqu'à
ce que 2 bips de confirmation retentis-
sent.
Appuyez sur chacune de ces touches,
pour les masquer.
52
Les touches 2, 4, 6 et 8 se mettent à
clignoter.
Cette procédure permet d'empêcher
que la programmation ne soit modifiée
par inadvertance.
Quelques instants après, toutes les
touches de la zone à touches de com-
mande (7) se mettent à clignoter.
Deleting the Commands of All the Devices
Press the DELETE key (6) for approx. 3
seconds.
Press each of these keys until they are
hidden.
Press the DELETE key (6) again for 3
seconds.
Macro Function
The macro function permits storing a command sequence of as many as 25 com-
mands on one key. This is especially useful, if you want to control multiple devices.
Using this function, it is possible to switch on or off all the devices of your audio/video
system at the same time with one single key. You can programme several macros.
Programming
Press the MACRO key (6) for approx. 3
seconds.
Press each of these keys until they are
hidden.
Use the device selection keypad (8) to
select the device, on the keypad of which
you want to store the macro command.
Use the device selection keypad (8) to
select the first device, on the control
keys (7) of which the first macro com-
mand is stored.
Keys 2, 4, 6 and 8 will flash.
This procedure prevents inadvertent
programme changes.
The keys on the control keypad (7) will
be displayed again and the DELETE
indicator (3) will flash.
The OK indicator (2) will be displayed
and you will hear 6 confirmation tones,
indicating that all the commands have
been deleted.
Keys 2, 4, 6 and 8 will flash.
This procedure prevents inadvertent
programme changes.
The keys on the control keypad (7) will
be displayed again and the LEARN
indicator (4) will flash.
This key will then trigger the macro
function later on. Choose a key that is
not used for any other device function,
since any command assigned to that
key will be overwritten.
Caution:
Do not choose a device selection key
(8) for storing a macro command.
37
Werbung
Kapitel
Fehlerbehebung
