Ariston VLS EVO DRY 50 Gebrauch- Und Montageanweisung, Wartung Seite 38

WI-FI FUNCTION
Aqua Ariston NET configuration
For further information about Wi-Fi configuration and the product registration procedure, refer to the enclosed
quick start guide.
Creating an account
1. Download and install the app on your cellphone (the name of the app is given in the quick start guide)
2. Launch the app, click on REGISTRATION, and fill in all fields.
3. You will receive a confirmation email. Click on the link included in the email to activate your account.
The username is the same as your email address.
Wi-fi configuration and product registration
1. Press the Wi-Fi button. The "
2. Hold the Wi-FI button down for 5 seconds: the "
show the symbol "
3. Launch the app and follow the guided procedure
4. If the connection is successful:
- the symbol " " appears on the display
- the " " lamp remains steady on
- the app displays a message to confirm registration
if the connection fails, check everything carefully and repeat the procedure from the start.
Note: the password may not contain Chinese characters. Change them if any are present.
App layout
The following instructions are included (Fig. 25)
• (J)
ON/OFF
• Manual, Night and Programming modes (L)
• Button displaying the number of showers (N), this can be selected or removed by touching it lightly
• Communications status indicator (O)
• Energy saving button (R)
• Remaining time (S)
• Current water temperature (T)
Scroll to the right to display other pages.
Connection status description
On
Slow flashing
Button
Rapid flashing
Off
Symbol On
Symbol On
38 / EN
" lamp starts flashing slowly (fig.10)
" (Fig. 11)
The Wi-Fi is connected to the home network
The Wi-Fi module is attempting to connect to the home net-
work, or the connection has failed
The Wi-Fi module is active
The Wi-Fi module is off
The Wi-Fi is already active and can be connected to the home
network.
Correctly configured and connected to the internet and
Cloud
" lamp will start flashing quickly and the display will