Setting Up The Divx; Reference; Troubleshooting; Specifications - Samsung DVD-D360 Bedienungsanleitung

Setting Up the DivX

1. With the unit in Stop mode, press the MENU button.
2. Press the √/® buttons to select DivX Page, then press the † or ENTER button.
3. Press the π/† buttons to select the desired item, then press the ® or ENTER button.
Note :
• Press Ok will make the registration code window disappear.
• DivX can only be accessed at stop mode.

Reference

Troubleshooting

Before requesting service (troubleshooting), please check the following.
Problem
The screen is
• Press the button (in front panel) for more than 5 seconds under no disc
blocked
inside. All settings will revert to the factory settings.
• Press the button (in front panel) for more than 5 seconds under no
Forgot password.
disc inside. All setings including the password will revert to the factory
settings. Don't use this unless absolutely necessary.
Action

Specifications

Power Requirements
Weight
Power Comsumption
General
Dimensions
Operating Temperature
Range
Operating Humidity Range
Scart Jack
Video
Output
Component Video
Frequency Response
Maximum Output Level
Audio
Output
Digital Audio Out
Output terminal
AC 110-240 V ~ 50/60 Hz
1.2 KG
For the power supply and Power Consump-
tion, refer to the label attached to the product.
360mm (W) X 207mm(D) X 42mm (H)
+5°C to +35°C
10 % to 75 %
R(Red) : 0.7 Vp-p (75 Ω load)
G(Green) : 0.7 Vp-p (75 Ω load)
B(Blue) : 0.7 Vp-p (75 Ω load)
Composite Video : 1.0 Vp-p (75 Ω load)
Luminance Signal : 1.0 Vp-p (75 Ω load)
Color Signal : 0.3 Vp-p (75 Ω load)
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
20Hz ~ 20kHz
2Vrms
Coaxial terminal (S/PDIF)
RCA, SCART
11