Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Download and install the WIFI app on a smartphone
Android Version:
Go to your play store
under trail cam and load
Download the app: "Trail Cam".
Blaue LED
Remote control
1. Install the app "Trail Cam".
2. In the camera, turn the "OFF" key to "ON".
3. When the 15 second countdown has elapsed, the camera enters standby / re-
cording mode. (If the camera is already in the idle / recording mode, steps 2 and 3
will be ignored.
4. Press and hold the "ON" button on the remote control for 3 seconds. Then the
blue LED lights up, the camera turns on and automatically switches to Wi-Fi mode.
If the blue LED does not light up, the battery - AAA - must be replaced (battery not
included).
Open the app "Trail Cam". Click any button from memory card (1) or setting (2) or
checking information (3) ".
4.1 In the smartphone settings, open the WIFI connection interface, look for the
"Trail Cam H881Wifi _ *****" account, enter the password "12345678" to connect
to the WIFI.
5. To end the wifi connection, press the "OFF" button on the remote control for 3
seconds. The camera enters the sleep / capture mode.
and setting the camera to your liking.
Camera
IOS Version:
Go to your app store
under trail cam and load
Download the app: "Trail Cam".
16
(1)
(2)
(3)
App button
Werbung
