Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Video connection to TV
• The camera can transmit a video signal to an external monitor or to the video
input of a TV. Please refer to the monitor's instruction manual.
• Connect any suitable monitor to the TV-Out plug with the enclosed TV cable.
Inserting Memory Cards
• The unit supports both micro SD and SDHC memory cards as well as TF cards
with a capacity of up to 32 GB.
• Push in the memory card as shown in the diagram on the card slot. Never force
a card into the slot.
• When transporting memory cards, always wait until the card is at the temperature
of its surroundings before using it. Temperature changes and humidity can cause
condensation which can lead to short-circuits.
• To remove an SD / SDHC memory card from the slot, lightly press the raised edge
of the card until it springs out, and then remove it completely.
• SD / SDHC memory cards have a locking system that is designed to prevent un-
intentional erasing of data. Select the "LOCK" position on the side of the card. Ho-
wever, the camera cannot save images to the card if it is set to this position.
Operational Use
Switching on and off is carried out with the selector switch "Off Test On"!
After switching on, "check IR LED Batt." Appears, then change batteries if neces-
sary.
Set the selector switch to the "Test" position to perform the settings or program-
ming.
Press down to switch from video to photo mode
Attention! The camera automatically switches back to video mode as soon as you
set the selector switch to "Test". Pay attention to the display in the upper left of the
screen!
Press the up button to switch from the photo back to video mode.
Press the MENU button to open the settings menu.
Changes not confirmed by "OK" will not be saved!
Press the up / down button to select the desired menu entry and activate it with
the OK button. If you change the setting, you must always confirm your changes
with "OK".
Press the MENU button again to navigate backwards to the previous menu level.
12
Werbung
