Use And Installation Of The Control Panel - Helo HNS T1 Produkthandbuch

User and installation manual HNS-T1
Use and installation of the control panel for HNS – T1
Control panel RA27 (T1)
Loosen the screw at the bottom of the control panel.
Install the bottom piece for the control panel
NOTE: If the control panel is installed
in a humid place, use the provided
seal.
Control panel dimensions:
-
-
-
Height 140mm
Width 80mm
Depth 22 mm
Remove the control panel frame and lid.
Install and connect the cable. For
connecting instructions, see page 10.
15