Cable Management System - 3M MicroTouch M1500SS Bedienungsanleitung

3M™ MicroTouch™ Display M1500SS User Guide
You should be sure all cable connections are secure -- tighten all cable screws. Shaking
and vibration may dislodge cables that are improperly connected.
Route all wiring and cabling away from heat sources and sharp metal edges to avoid
damage. Also, keep the touch sensor cable away from sources of electromagnetic and
radio frequency interference.

Cable Management System

Figure 11 Removing the Cable Management Cover
To remove the cable management cover follow steps below:
Push in and lift up on each of the two tabs located on the left and right sides of the
1.
cover. This action will release the cover tabs from the base.
Figure 12 Cable Management Cover Tabs
Slide the cover back towards you to remove.
2.
3M Touch Systems, Inc. Proprietary Information
12