Unpacking; Included In The Box - Lab.gruppen D SERIE Kurzanleitung

7. Installation
7. Installation

7.1. Unpacking

Carefully open the shipping carton and check for any damage to the device or the supplied accessories. Every
Lab.gruppen product is tested and inspected before leaving the factory and should arrive in perfect condition. If
any damage is discovered, please notify the shipping company immediately. Only the consignee may initiate a
claim with the carrier or their insurers for damage incurred during shipping. Save the carton and packing materials
for the carrier's inspection.

7.1.1. Included in the box

In addition to the D Series device, the shipping carton includes the following items:
• D Series Tesira Quick Start Guide (this document)
• AC mains lead (power cable) with Neutrik powerCON connector and AC socket plug according to
® ®
ordering selection
• Rear brackets for additional rack support (pair) along with associated mounting hardware
• Connector kit including all needed connectors
• Front grille and dust filter assembly
NOTE: Depending on the model, the connector kit might include more connectors than applicable for the product
you have. Select those connectors required for your unit and application
Please keep the original carton and associated packaging to facilitate shipping of the device should the need arise.
7.2. Mounting
D Series is made for mounting in 19 inch racks. Four screw holes are available for attachment of the amplifier to
the racks front rack rail. This device has no top or bottom vents; therefore, units may be stacked directly on top of
one another. Sufficient space should be available at the rear to accommodate connectors and cables. In addition,
allowance must be made for cable or loom bends within a rack.
7.2.1. Rear Mounting
Two rear support brackets, along with associated mounting hardware, are included with the D Series device. It is
strongly recommended that these are used wherever possible. Fit the brackets to the vertical rails at the rear of
the rack. The support brackets are reversible and may be fitted to point either to the front or rear of the rack; the
proper orientation depends on the rack depth and position of the rear rack rails.
18
D SERIES Tesira Quick Start Guide rev 2.0.0