Herunterladen Inhalt Inhalt Diese Seite drucken

R82 Wombat Living Bedienungsanleitung Seite 33

Vorschau ausblenden Andere Handbücher für Wombat Living:
Inhaltsverzeichnis

Werbung

Safety
Signs, symbols and instructions placed on this product must never be covered or removed and must
remain present and clearly legible throughout the entire lifetime of the product. Immediately replace or
repair illegible or damaged signs, symbols and instructions. Contact your local dealer for instructions.
Caregiver
Read the "User Guide" carefully before use
and keep it for future reference. Incorrect
use of this product may cause serious injury
to the user
Always use the correct lifting techniques
and aids for this purpose
Never leave the user unattended in this
product. Ensure permanent supervision by
an adult
Repair/replacements must only be made
using new original R82 spare parts and fit-
tings and carried out in accordance with the
guidelines and service intervals prescribed
by the supplier
If there is any doubt as to the continued
safe use of your R82 product or if any parts
should fail, stop using the product immedi-
ately and contact your local dealer as soon
as possible
Over short distances, the product can be
used for transport of an user when he/she
is fixed in the product. Do not cross any ob-
stacles during transport
Environment
Observe the surface temperature on the
product, before placing an user in it. This
goes especially for users with insensitive
skin as they cannot feel the heat. If the sur-
face temperature is above 41°C then allow
the product to cool before use
Use this product on a level surface without
any obstacles. Be aware of reduced maneu-
verability on slippery surfaces
When using on inclines, please refer to
measurements
User
If the user is close to the max. load limit
and/or has a lot of involuntary movements,
e.g. rocking, a larger size with a higher max.
load or a different R82 product should be
considered
support.R82.org
ENGLISH
Product
Carry out all positional adjustments on the
product and accessories and ensure that
all knobs, screws and buckles are securely
fastened before use. Keep all tools out of
the reach of children
Activate the brakes before placing the user
into the product
Ensure the stability of the product is main-
tained before placing the user in it
Ensure the castors are fully-functional and
secure before use
Inspect the product and all of its accesso-
ries and replace any worn out parts before
use
Do not expose the gas spring to pressure or
high temperatures
Do not expose the piston rod to scratches
etc. It is important to use a cloth or the like,
if tools are used to adjust the gas spring
The footplate is for support only! The foot
support does not have a weight bearing
function
This product is tested for resistance to igni-
tion at level non-ignition in accordance with
EN 1021-1 and EN 1021-2
The product might lose its flame resistant
characteristics if using other than original
R82: Cushions
This product is not to be occupied in a mo-
tor vehicle. The user must be positioned
in a vehicle seat and the product must be
stored in a luggage compartment
The user must not occupy the product while
it is being transported into or out of a ve-
hicle by a lift
Environmental conditions
Operating temperature: 5°C to 40°C
Storage temperature: -10°C to +50°C
Relative humidity: 20% to 90%
Atmospheric pressure: 800 to 1060 hPa
33
EN

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Caribou

Inhaltsverzeichnis