Connection Instructions - Allen-Bradley PowerFlex 755 Installation

Remote Monitoring for PowerFlex 755 AC Drive

Connection Instructions

Both the Netbiter EC310 and EC350 have two Ethernet ports, labeled WAN and LAN. For both models, the LAN port is used to connect to the
PowerFlex 755 via EtherNet/IP, using the supported topologies on page 5.
When installing a Netbiter EC310, the Ethernet WAN port connects to the enterprise Internet network. Your Internet firewall is required to allow
a Port 443 outbound connection to https://www.ramonitoring.com and xx.netbiter.net (the "xx" indicating the complete range). Access to a
domain name system (DNS) server is also required. The WAN port is not used for the Netbiter EC350.
If installing the Netbiter EC350, connect the cable from the antenna to the Netbiter EC350 using the screw connection on the surface of the
module.
Connect Network Devices
EC310 Network Wiring
4 Rockwell Automation Publication GMSP-IN002A-EN-P - March 2016