Safety Advice - Powerfix Profi Z16531 Bedienungsanleitung

Safety advice / Operation
Safetyadvice
Keep all the safety advice and instruc-
tions in a safe place for future refer-
ence!
J
 WArNINg!
LOSSOFLIFEANDACCIDENT
TOINFANTSANDCHILDrEN!
Never leave children unsupervised with the pack-
aging materials. Danger of suffocation. Keep
out of the reach of children. It is not a toy.
J
Always keep the product out of reach of children.
Children often underestimate danger. Store the
device indoors in an enclosed, dry place where
it cannot be reached by children.
J
Ensure that staples and nails cannot under any
circumstances strike people or animals. Failure
to observe this advice may lead to injury.
J
Wear personal protective equipment and always
wear safety glasses. This also applies to people
who may be helping with the work by support-
ing or holding the workpiece.
m C AUTION! Do not support yourself with your
hands under any circumstances near or in front
the stapler gun or on the surface being tacked.
One slip may result in injury.
J
Every time before you use the device, check
that it is in perfect condition. Damage to any of
its components may lead to injury.
J
Check that all parts have been assembled and
fitted properly. Incorrect assembly or fitting
may lead to injury.
J
Remain alert at all times and always watch what
you are doing. Proceed with caution. Just one
moment of inattention during assembly may
lead to injury.
J
Before moving or putting away the stapler gun,
check that there are no staples or nails still in
the device.
6 GB
53466_Handtacker_Content_LB4.indd 6
 Operation
Q
Fillingwithstaples/nails
Q
m CAUTION! Use only the staples and nails
described in these operating instructions (see
"Staples / nails"). Failure to observe this advice
DANgErOF
may result in damage to the device.
Note: You can use three different types of staples /
nails in the stapler gun; flat crown staples, round
crown staples and T-nails. All three types are sup-
plied with the stapler gun.
Followthesesteps:
1. Press in the staple pusher
pull it downwards. Then pull the staple pusher
completely out of the magazine
2. Push the staples or the T-nails into the maga-
zine
m C AUTION! Ensure that the staples or T-nails
are correctly inserted (see Figs. B, C, D).
3. Push the staple pusher
zine
and then pull it slightly upwards to fix it in place.
Settingtheimpactforce
Q
m C AUTION!Never screw the adjusing screw
completely out of the stapler gun. This could
result in damage to the device.
j
Screw out the adjusing screw
the impact force.
j
Screw in the adjusing screw
the impact force.
Stapling
Q
m C AUTION! Never support yourself by placing
your hands near or in front of the stapler gun
or the workpiece surface. A slip can result in
injury.
Followthesesteps:
1. Press the staple eject opening
where you wish to staple.
2 slightly and then
4 .
back into the maga-
2
. Press in the staple pusher
4
7
7
6
2
(see Fig. A).
4
slightly
2
7
to reduce
to increase
on the spot
17.05.10 15:18