Precautions - Sony IPELA serie Bedienungsanleitung

Precautions

Operating or storage location
Operating or storing the camera in the
following locations may cause damage to
the camera:
• Extremely hot or cold places (Operating
temperature: 5°C to 35°C [41°F to 95°F])
• Exposed in direct sunlight, or close to
heating equipment (e.g., near heaters)
• Close to sources of strong magnetism
• Close to sources of powerful
electromagnetic radiation, such as radios
or TV transmitters
• Locations subject to vibration or shock
Ventilation
To prevent heat buildup, do not block air
circulation around the camera.
Connecting to the Communication
System
Do not connect the camera cable to the HD
Visual Communication System while the
Communication System is turned on.
Otherwise, the camera and System may
suffer damage, or the picture may not be
displayed.
Transportation
When transporting the camera, repack it as
originally packed at the factory or in
materials equal in quality.
Cleaning the main unit
• Use a blower to remove dust from the lens.
• When the body of the camera is dirty,
clean it with a soft cloth that is soaked with
a diluted neutral detergent and tightly
wrung. Then finish with a dry cloth.
• Do not use any type of solvents, which
may damage the finish.
• When you use a chemical cloth, follow its
instructions.
• Do not sprinkle volatile matter such as
pesticide over your camera nor allow
rubber or vinyl to come in contact with the
18
Precautions
camera for a long period of time. Doing so
may damage the finish.
Maintenance
The camera mechanism may cause abnormal
noise due to wear and lubrication loss after a
long period of use. To maintain optimum
performance, we recommend periodical
maintenance. If abnormal noise occurs,
consult with your Sony dealer.
Note on laser beams
Laser beams may damage the CMOS. If
you shoot a scene that includes a laser
beam, be careful not to let a laser beam
become directed into the CMOS of the
camera.