Units And Custom Functions; Activating A Unit Or Custom Function - Anton Paar DMA 35N Betriebsanleitung

7

Units and Custom Functions

7.1

Activating a Unit or Custom Function

• Pushing the "ON/OFF" and "store" keys simultaneously activates the "SET"
mode. Display:
• A long push of the "store" key activates the selection of the temperature unit (°C/
°F).
- Toggle between °F and °C with a short push of the "store" key.
- Store your selection and move further to activate density or a density-related
custom function by a long push of the "store" key.
• Move through the list of choices by pushing the "store" key shortly.
• To activate the displayed function give the "store" key a long push.
• The instrument is automatically switched off, and after turning it on again the
selected density or density-related function will be displayed.
18
Hint:
All stored results are deleted from the memory if the "SET"
mode is activated.
B46IB01