Extremis HOPPER BENCH Bedienungsanleitung Seite 5

4. Put the tabletop with its frame facing downwards on top of the two boards. The top of the table legs is now at the
same height as the tabletop.
A
5. Put 3 carriage bolts through the square holes of eacht table leg. Move the table legs towards the table frame until
the 3 threaded rods fit into the 3 holes in the coupling piece. Screw the supplied nuts and lock washers onto the
threaded rods, but do not tighten them yet.
6. Before assembling the benches, remove the packaging material from under the frame!
B
english 5