Safety Information; General Safety - PACLITE Equipment MASTER 600 Bedienungshandbuch

MASTER 600-700-900-1200
For your own personal protection and for the safety of those around you, please read and ensure you fully
understand the following safety information. It is the responsibility of the operator to ensure that he/she fully
understands how to operate this equipment safely. If you are unsure about the safe and correct use of the
MASTER Trowel, consult your supervisor or Paclite Equipment-Uni-corp Europe on +33 (0) 1 49 56 02 82.
Improper maintenance can be hazardous. Read and understand this section before you
perform any maintenance, service or repairs.
CAUTION

GENERAL SAFETY

• The owner of this machine must observe, and also train the user of the machine to observe, the effective
labour protection laws in the country of application.
• Use suitable lifting equipment to lift the machine.
• This machine is to be used for is intended application only.
• This machine must only be operated by well-trained personnel.
• Personal Protective Equipment (PPE) must be worn by the operator whenever the equipment is being used.
• Cordon off the work area and keep members of the public and unauthorised personnel at a safe distance.
• Make sure you know how to safely switch this machine OFF before you switch it ON in case you run into
any difficulties.
• Always switch OFF the engine before servicing it.
• During use, the engine becomes very hot. Always allow the engine to cool down before touching it.
• Never leave the engine running and unattended.
• Never remove or tamper with any fitted guards; they are there for your own protection. If they are damaged
or missing, DO NOT USE THE MACHINE until the guard has been replaced or repaired.
• Keep hands and feet away from moving blades.
• Always switch OFF the engine before transporting it, moving it around site or servicing it.
• Do not operate the machine when you are ill, feeling tired or when under the influence of alcohol or drugs.
• This machine is designed to eliminate the possible risks arising from the use of it. However, risks DO reside,
and these residual risks are not clearly recognisable and may cause personal injury or property damage,
and possibly death. If such unpredictable and unrecognisable risks become apparent, the machine must
be stopped immediately, and operator or his supervisor must take appropriate measure to eliminate such
risks. It is sometimes necessary that the manufacturer must be informed of such event for future counter
measuring.
6

Safety Information