Canon PIXMA iP3300 Kurzanleitung Seite 14

Date/File No. Print Setting
If Date/File No. print is set to Default (the setting to follow that of the printer) on the
PictBridge compliant device, Off is applied.
If the images already have dates superimposed when shot, set this PictBridge setting item to
Off. If you select Date, File No., or Both, the date and/or file number will be printed over the
date printed by the camera's function.
Note
Never disconnect the USB cable during printing unless when explicitly allowed to by the
PictBridge compliant device.
When disconnecting the USB cable between the PictBridge compliant device and printer, follow
the instructions given in the device's instruction manual.
You cannot set or do the following by operating on the PictBridge compatible device.
– Print quality setting
– Printer maintenance
Confirming and Changing PictBridge Print Settings on the Printer
You can confirm and change the default settings for items such as media type and size that are
preset to the printer and applied to PictBridge printing. To change the settings, you need to install
the Canon Setup Utility from the Setup CD-ROM and connect the printer to your computer. For
details, refer to the User's Guide on-screen manual.
10 Printing Photographs Directly from a Compliant Device