Printing With Macintosh - Canon PIXMA iP3300 Kurzanleitung

Printing with Macintosh

1
Turn on the printer and load the paper in the printer.
2
Create a document or open a file to print using an appropriate application software.
3
Select Page Setup on the application
software's File menu.
4
Confirm that iP3300 is selected in Format
for.
5
Select the desired paper size in Paper Size.
6
Click OK.
7
Select Print on the application software's File
menu.
8
Select Quality & Media in the pop-up menu.
9
Specify the required settings.
Make sure that the proper paper source is selected
in Paper Source.
Note
If you select Front for Plain Paper, the printer will
automatically switch to the Front Feeder only when
Plain Paper is specified for Media Type. You
cannot load paper other than A4, Letter, or B5-sized
plain paper in the Front Feeder.
For details on other printer driver functions, click
to view the Printer Driver Guide on-screen manual.
If the on-screen manuals are not installed, the
Printer Driver Guide on-screen manual is not
displayed even if
10
Click Print.
6 Basic Printing
is clicked.