Technical Data; Noise And Vibration - Felisatti DC10/12N2 Bedienungsanleitung

Ø
Type
Weight according to
EPTA-Procedure 01/2003 [kg]
The instructions contained in this manual must be strictly
followed, it should be carefully read and kept close at hand
to use when carrying out maintenance on the indicated parts.
If the machine and charger are used carefully and normal
maintenance is carried out, they will work well for a long time.
The functions and use of the tool you have bought shall be
only those described in this manual. Any other use of the tool
is strictly forbidden.
ILLUSTRATIONS
DESCRIPTION (See figures)
A Keyless drill chuck
B Torque adjustment ring
C Speed selector
D Forward/reverse switch
E On/off/speed adjustment switch
F Battery
G Battery release button
H Screwdriver bit
I Battery charger
J Charging light
M Discharging light
4

TECHNICAL DATA

DC10/12N2
12
25
6
12
0,6
1. Noise emission
Measured values are according to EN 60745
Power tool
A-weighted sound power level
(L WA) [dB(A)]
A-weighted
emission level (L pA ) [dB(A)]
Uncertainty (K) [dB(A)]
2. The operator to wear hearing protection
3. Vibration emission
Vibration total values(triaxial vector sum) determined
according to EN 60745
Power tool
Vibration value (ah)
Drilling
[m/s ]
2
mode
Uncertainty (K) [m/s
4. The following information
• The declarde vibration total value has been measured in
DC13/14,4N2
0-400
0-1400
1,5-13
2,0
13
30
6
NiCd
14,4
2000
0,69
220-240 V
12-14,4
1,8
60
0,42

NOISE AND VIBRATION

DC10/12N2
DC10/12N2
]
2
DC10/14,4N2
88
77
3
DC10/14,4N2
2.5
1.5