General Information; Technical Data - Felisatti TP115/300 Bedienungsanleitung

OPERATING INSTRUCTIONS FOR ORBITAL SANDER INTRODUCTION
All FELISATTI portable tools conform with standard EN60745, 98/37/EC machine directives and following modifications, with
2006/95/EC, 93/68/EEC and, with regard to electromagnetic compatibility, the tools conform with directive EEC/89/336, and
with standards EN55014.1, EN 55014.2, EN 61000.3.2, EN 61000.3.3 and EN 50366.
The mark on the tool guarantees its conformity.
If used with the care and serviced regularly, this tool will provide long-lasting and reliable service. Carefully follow the
instructions contained in this manual, using them for reference for any eventual controls that may need to be carried out.

1.1 TECHNICAL DATA

MODEL
Voltage and current
Frequency
Absorbed power
Unloaded speed
Full-load speed
Oscillation unloaded
Orbit
Pad dimensions
Weight
Sound pressure emitted
Sound power emited
Vibration level m/sІ (*)
* Surveys carried out according to standards: EN60745.1 - EN60745.2.4
1.1 STANDARD EQUIPMENT
TPF115/350VE-TPF115/350: Suction unit pipe union.
The series fittings may vary according to the model purchased
and the actual commercial situation.
1.2 ACCESSORIES AVAILABLE ON REQUEST
Abrasive paper, paper perforater, suction unit, suction unit kit
(only for models programmed for suction unit use).
1.3 SAFETY STANDARDS
The tool has been designed and constructed to permit
operation in all situations and in absolute safety. In particular
working conditions remember to use protective gloves and
safety goggles.
The tool has been designed and constructed to reduce noise
to minimum levels. (See technical data 1.1). In particular
working conditions the maximum sound level at the place of
work may exceed 85 dBA. In this case the operator must use
ear protectors. Work carefully and maintain the tool in perfect
working order, for your own safety.

GENERAL INFORMATION

1.0 THE AIM OF THIS MANUAL
This manual has been prepared by the Manufacturer as an
integral part of the mitre saw equipment.
The information contained is for the benefit of professional
operators.
This manual defines the purpose for which the mitre saw
was designed, and contains all the information necessary
to ensure safe and correct use. We therefore recommend
reading the manual carefully before proceeding to any form
of adjustment, operation or maintenance. Constant respect
for the contents of this manual ensures both machine and
operator safety and the most economical and longest
working life of the machine itself. Photographs and drawings
have been supplied by the manufacturer for
exemplifying purposes; with the aim of following a policy
of constant development and product modernisation, the
TECHNICAL DATA
V / A
Hz
W
/min
/min
/min
mm
mm
kg
Lpa dB(A).(*)
Lwa dB(A).(*)
mm
manufacturer is entitled to make modifications without
forewarning.
1.1 TOOL IDENTIFICATION
The plate located on the left hand side of the tool identifies the
model, the data plate located on the right hand side of the tool
contains the model references, the technical specifications of
the motor and the constructor.
1.1.1 IDENTIFICATION
A Logotype plate
B Data plate
C Principal handgrip
D Switch
E Switch locking push-button
F Supplementary handgrip
G Base (Pad)
H Suction
I Abrasive paper fixing clamp
1.2 MANUFACTURER – IDENTIFICATION
Interskol Power Tools S.L.
Carretera de Sant Joan de les Abadesses
s/n17500 RIPOL, (Girona), SPAIN
Tel +34972700200 - Fax +34972700554
E-mail: e-mail: felisatti@interskol.es
WARNING! Read all instructions. Failure to follow all
instructions listed below may result in electric shock,
fire and/or serious injury.
The term "power tool" in all of the warnings listed below
refers to your mains operated (corded) power tool or battery
operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
1) WORK AREA
a) Keep work area clean and well lit. Cluttered and dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres, such
TPF115/350
230V-1,6A
50-60
300
10000
6000
20000
2
115x210
2,9
75
86
4,3
GENERAL SAFETY STANDARD
TPF115/350VE
230V-2,4A
350
6500
6000
13000
4,5
115x210
2,9
70,4
83,4
4,9
3