Axis 216FD Installationsanleitung Seite 7

AXIS 216FD/AXIS 216FD-V Installation Guide
AXIS IP Utility - single camera/small installation
AXIS IP Utility automatically discovers and displays Axis devices on your network. The
application can also be used to manually assign a static IP address.
Notes:
• The computer running AXIS IP Utility must be on the same network segment (physical subnet) as the
AXIS 216FD/AXIS 216FD-V.
• Both models will display in AXIS IP Utility as the AXIS 216FD.
Automatic discovery
1. Check that the AXIS 216FD/AXIS 216FD-V is connected to the network and that power
has been applied.
2. Start AXIS IP Utility.
3. When the camera appears in the window, double-click it to open its home page.
4. See page 9 for instructions on how to assign the password.
Assign the IP address manually
1. Acquire an unused IP address on the same network segment as your computer.
2. Click the button
number and IP address for the AXIS 216FD/AXIS 216FD-V. The serial number is located
on the product label.
3. Click the Assign button and follow the instructions.
4. Click the Home Page button to access the camera's web pages.
5. See page 9 for instructions on how to set the password.
Assign new IP address using serial number and enter the serial
Page 7