Securing Your Baby - Sparco F1000KI Bedienungsanleitung

1.1 How to adjust the belts, headrest and seat
positions
IMPORTANT
The correct belt height of the shoulder belts is attained
when the belt disappears into the shell slightly above the
shoulder of the child. Make sure that the shoulder belts fit
properly over the shoulders of the child.
- Adjusting the belts
Loosen the harness straps by pressing
the release button and pulling the
harness straps as far as you can.
Note! Do not pull the shoulder pads.
- Eight heights of the headrest
The headrest can be set at five
di erent heights in group I mode.
There are three additional positions in
Group II & III mode once the shoulder
pads and harness straps has been
removed.
Press and pull the handle behind
headrest. It is important to make sure
the headrest fit properly to head.
- Two positions adjustment mechanism
This car seat can be reclined to two di erent seating position
by pulling adjusting board under seat base as shown in right
pictures.(Only for Group I)

Securing your baby

GB
ES
FR
IT
PT
DE
9