Opex OMATION Envelopene 410 Serie Bedienungsanleitung Seite 68

Right Arrow Hold - will continuously shift the selection one item to the right until
the key is released. It will work the same as the right arrow press.
4.1.2. The Run Screen
All of the basic Operator functions can be accessed right from the Run screen.
Run screen information:
• The run screen will show overall Envelope counts with the large counter
• The smaller (CUT) counter is how many envelopes have been cut, and is
reset every time the chip bin is removed
4.1.2.1. RUN
This selection will turn the motor on to process mail using the currently
selected job.
4.1.2.2. CHANGE JOB
This selection will allow the operator to change the currently selected job.
34
OMATION® Series 410 Envelopener™ Operator Manual
Currently selected Job
Envelope Chip Bin
Count Counter
Figure 4-2: Run screen
OPEX Corporation
Descriptions
below
Operation