Cautions On Installation; Installing The Source Unit - Clarion CZ501E Benutzerhandbuch Und Installationhandbuch

4) Cautions on Installation

1. Prepare all articles necessary for
installing the source unit before
starting.
2. Install the unit within 30° of the
horizontal plane. (Figure 2)
3. If you have to do any work on the car
body, such as drilling holes, consult
Max 30˚

5) Installing the Source Unit

1. Place the mounting bracket into the instrument panel, use a screwdriver to bend
each stopper of the mounting bracket inward, then secure the stopper.
2. Wire as shown in Section 7) .
3. Insert the source unit into the mounting bracket until it locks.
4. Take care of the top and bottom of the trim ring and mount it so that all the hooks
are locked.
Notes:
1. Some car models require special mounting kits for proper installation.
Consult your Clarion dealer for details.
2. Fasten the front stopper securely to prevent the source unit from coming loose.
• Console opening dimensions
25
CMB1525194E(Z501E) manual(SMK).indb
Figure 2
(182 mm)
Hole
25
your car dealer beforehand.
4. Use the enclosed screws for
installation.
Using other screws can cause
damage.
(Figure 3)
Chassis
Max. 6 mm (M5 screw)
Figure 3
Chassis
Damage
2010-12-2 8:56:33