Morphy Richards Prism Bedienungsanleitung Seite 5

KT108101MEE Rev3.qxp_Morphy Richards Instruction Book 17/07/2017 18:18 Page 5
Features
(1) Handle
(2) Ring Pull
(3) Lid
(4) Spout
(5) Water Gauge
(6) On/Off Switch
(7) Cordless Base
(8) Cord Storage (underneath)
(9) Limescale Filter
(10) 360° Connector
Using your kettle
Fill your kettle with water through either the Spout (4) or Lid (3), do
1
not fill past the MAX line.
Place your kettle on the Cordless Base (7) and press the On/Off
2
Switch (6).
When boiled, your kettle will automatically switch off. Remove
3
from the Cordless Base.
4 Pour the water from your kettle. CAUTION: Will be hot
Before first use
Before using your kettle for the first time, fill with water, boil and
pour away.
Removing the Filter
1. Open the Lid (3).
2. Lift the Limescale Filter (9) upwards from its holder.
3. To refit the Limescale Filter, slide it into the side wall guides of the
filter holder until it clicks into place.
WARNING: Unless the Limescale Filter is fitted correctly, the
kettle lid may not close and lock securely.
Cleaning your kettle
• WARNING: Always disconnect the plug from the mains and
allow your kettle to cool before cleaning.
• Wipe the outside with a damp cloth.
IMPORTANT: Do not use abrasive cleaners on the outside of
•
the kettle which may scratch the surface.
5
Descaling
IMPORTANT: As this appliance is fitted with a concealed element
it must be descaled regularly. The frequency of descaling depends
on usage and the hardness of the water in your area.
Excessive scale can cause the appliance to switch off before
boiling and may damage the element invalidating the warranty.
It is essential that regular descaling takes place.
Remove hard scale using a proprietary descaling product suitable
for stainless steel, glass or plastic.
For stainless steel kettles please follow the instructions carefully.
Alternatively use citric acid crystals (available from most
pharmacies) as follows:
1. Fill the appliance 3/4 full, boil, then unplug the appliance (remove
your cordless kettle from the base unit) and stand it in an empty
sink or bowl.
2. Gradually add 50g of citric acid crystals to the water, then leave
the kettle to stand. Do not use a more concentrated solution.
3. As soon as the effervescence subsides, empty your kettle and
rinse it thoroughly with cold water.
4. Wipe the outside of the appliance thoroughly with a damp cloth to
remove all traces of acid which may damage the finish.
IMPORTANT: Ensure that the electrical connections are
completely dry before using the appliance.
Contact us
Helpline
If you are having a problem with your appliance, please call our
Helpline, as we are more likely to be able to help than the store
you purchased the item from.
Please have the product name, model number and serial
number to hand when you call to help us deal with your enquiry
quicker.
UK Helpline: 0344 871 0910
IRE Helpline: 1800 409 119
Spares: 0344 873 0710
TalkTo Us
If you have any questions or comments, or want some great
tips or recipe ideas to help you get the most out of your
products, join us online:
Blog: www.morphyrichards.co.uk/blog
Facebook: www.facebook.com/morphyrichardsuk
Twitter: @loveyourmorphy
Website: www.morphyrichards.com
g
f
d
h
p
i
q
}
∂
5