Saeco Incanto Cappuccino Bedienungsanleitung Seite 24

24
INSTALLATION / CIRCUIT LOADING
The messages displayed by the machine during operation are shown
on page 34.
Check that all components
are correctly placed.
Move the ON/OFF switch to
"I" to turn on the machine.
Turn the knob clockwise to
terminate the circuit-load-
ing process.
Fill the coffee bean con-
tainer with coffee beans.
The machine is warming Place a glass under the
up; lights are fl ashing. cappuccinatore.
Remove the glass. When the indicator lights
are fi xed, the machine is
ready for use.
Important warning for using the "Aqua Prima Filter" can be found at
page 35.
The "Aqua Prima" fi lter can Fill the tank with fresh drin-
be installed (see pg.31). king water.
(Optional; it can be pur-
chased separately).
Turn the knob countercloc-
kwise to start loading the
circuit.
See rating plate
Insert the plug into a sui-
table electric socket.
Wait until water fl ows
steadily from the cappuc-
cinatore.
Note: You must load the circuit before starting up
the machine for the fi rst time, if it has been inopera-
tive for a lengthy period or if the water tank has been
completely emptied. The circuit must also be loaded
each time the light fl ashes:
Check the dater on "Aqua Prima" fi lter; if fi lter is past its
date, replace it with a new one.