Eu Declaration Of Conformity - Extol Craft 920201 Bersetzung Der Ursprünglichen Bedienungsanleitung

VI. Cleaning and storing
the appliance
• To clean the LCD display or laser lens, a cloth or
cleaning tissues intended for cleaning glasses or
optical equipment may be used.
• Do not clean the plastic surface of the device
using organic solvents. The plastic surface could
be damaged.
• Store the device in a dry place, out of the reach of
children at a temperature in the range from -10 °C to
+45 °C. Prior to storage, take out the batteries.
VII. Meanings of markings
on the label
Read the user's manual
before use.
Meets respective EU
requirements.
Laser radiation. Do not
LASER
look into the ray. Class 2
2
laser equipment.
Electrical waste symbol
(see below).
EN
Serial number, indicates
SN the year, month, serial
production number.
Table 2
VIII. Waste disposal
PACKAGING MATERIALS
• Throw packaging materials into a container for
the respective sorted waste.
ELECTRICAL EQUIPMENT
Do not dispose of unserviceable
commodities in household waste, but
dispose of them in an environmentally
safe manner. According to Directive
(EU) 2012/19, electrical appliances
must not be thrown out with household waste,
but rather handed over for ecological disposal at
an electrical equipment collection point. Batteries
must be removed from the electrical equipment
prior to its disposal. You can find information about
electrical equipment collection points and collec-
tion conditions at your local town council office.
BATTERIES
Batteries in the electrical equipment
must be taken out of the electrical
equipment prior to disposal and must
not be, pursuant to Directive 2006/66
ES, thrown out with communal waste or into the
environment, but rather must be handed over for
ecological disposal at a battery collection point.
You can find information about these collection
points at your local town council office.
30
IX. Warranty period and conditions
(rights relating to faulty performance)
• The product is covered by a 2-year warranty from the date of sale according to law. If requested by the
buyer, the seller is obliged to provide the buyer with the warranty conditions (rights relating to faulty
performance) in written form according to law.

EU Declaration of Conformity

Subject of declaration - model, product identification:
Extol® Craft 920201;
Laser distance meter 0.05-40m
Manufacturer: Madal Bal a.s. Bartošova 40/3, CZ-760 01 Zlín • Company ID No.: 49433717
hereby declares
that the described product listed above is in conformity
with relevant harmonisation legal regulations of the European Union:
(EU) 2011/65; (EU) 2014/30; (EU) 2014/35;
This declaration is issued under the exclusive responsibility of the manufacturer.
Harmonisation norms (including their amendments, if any exist), which were used in the
assessment of conformity and on the basis of which the Declaration of conformity is issued:
EN 60825-1:2014; EN 61326-1:2013; EN 61326-2-2:2013; EN 50581:2012
Place and date of issue of EU Declaration of Conformity: Zlín 20.6.2019
On behalf of Madal Bal, a.s.
Martin Šenkýř
Member of the Board of Directors
31
EN