Maintenance Instructions; G Safety Recommendations For Maintenance; Table Of Lubricants - Annovi Reverberi XJS Serie Betriebs Und Installationsanleitung

Vorschau ausblenden

Inhaltsverzeichnis

Verfügbare Sprachen

Safety recommendations for maintenance

Before doing any maintenance work, depressurise the water system and isolate the pump from all en-

ergy sources.

When the jobs are done, before restarting the pump, check that no tools, rags or other materials have

been left close to moving parts or in hazardous zones.

Replace any excessively worn components with original parts and use the lubricants recommended by

the manufacturer.

Dispose of the worn-out components and lubricants in accordance with the relevant statutory require-

ments.

Carry out the routine maintenance procedures specified by the manufacturer to keep the pump safe

and performing well.

Frequency

Every working day

Every 50 working hours

Every 500 working hours

or every year

(1) This interval refers to the first oil change only

Table of lubricants

The pump is delivered complete with oil, with the characteristics stated on the data plate.

When topping up the oil, use an oil suitable for conditions in the operating environment (see recommenda-

tions provided in the annexes and see "Environmental operating limits").

The correct lubricating oil viscosity depends on the external temperature.

Use the graph to select the degree of viscosity best suited to the temperatures of use.

-35

-30

-25

-20

English