Battery Packs - Polycom SpectraLink 8020 Handbuch

Quad Charger
The Battery Pack snaps into the charging slot. The LED above the occupied
bay indicates the charging status of the Battery Pack in the bay.
A flashing LED may indicate a Battery Pack failure. Verify the
condition of the Battery Pack by the following procedure
before replacing it. First check the Battery Pack in a different
bay or substitute another charger and repeat the operation
that caused the failure. If the same Battery Pack lights a
steady LED when inserted in a different bay or charger, the
first charger may be faulty. Contact your system administrator
for service information.

Battery Packs

The Battery Packs must be recharged periodically. Three Battery Pack
options are available:
Type
Standard
Extended
Ultra-Extended
*Talk time and standby time will vary depending on handset model, call server, features
enabled and system configuration. These are minimum estimates. Your experience may be
significantly higher.
The type of Battery Pack is printed on the label. Remove the
Battery Pack and view the label to determine the type of
Battery Pack you have been issued.
12
Talk Time* Standby Time*
4 hours
6 hours
8 hours
Charging Time
80 hours
120 hours
160 hours
2 hours
3 hours
4 hours
English