LG PQCSB101S0 Montageanleitung Seite 19

I
Using Wireless Remote Controller
ON OFF
SET CANCEL
PLASMA
❈ Some remote controllers may not support above functions according to the production date of wired/wireless
remote controllers. As it has no concern with customer's use, use the remote controller available for the address
setting during installation.
❈ The remote controller having this function will be given with the purchase of central controller.
1. Address setting mode
1) Keep pressing upper left side key continuously and press RESET
button once. Now the system is ready for address setting.
2) Set the Indoor unit address using the temperature controller buttons.
Allowed Range : 00-FF
ex)
3
Address
check
A
Address
setting
3) After setting address, press ON/OFF key once towards Indoor unit.
4) The Indoor unit shows the set address and it means completion of
address setting process. (The address displaying time and its way
can depend upon the type of Indoor unit )
2. Address check mode
1) Keep pressing upper right side key continuously and press RESET
button once. Now the system is ready for address checking.
2) Press ON/OFF key once toward the Indoor unit which shows set
address on the display.(The address displaying time and its way can
depend upon the type of Indoor unit )
3) Reset the remote controller to use it for normal operation mode.
Addressing of Indoor Unit
Group No.
Indoor unit No.
Installation Manual 19