Lightmaxx Vector Silent PAR ARC Bedienungsanleitung Seite 15

ENGLISH
Hint! (Operating conditions)
Due to its structural characteristics, the device is designed for indoor and outdoor
operation (protection class IP65).
The first code number (6) indicates the protection against foreign bodies as well as
against contact. Products with the code number 6 are dustproof and completely protected
against contact. The second code number (5) determines the protection against water.
The code number 5 describes the protection against water jets from any angle.
Hint! (Power supply)
It is essential that you check that the device voltage matches your local mains voltage. It
is highly recommended that you fuse your mains socket with a residual current circuit
breaker (FI).
If you do not use your device for a longer period of time or carry out maintenance work,
disconnect the device from the mains in order to minimize danger. The same applies to
storm conditions such as thunderstorms, floods, etc.
Hint! (Error during data transmission)
Never connect the DMX input or output to audio devices such as power amplifiers or
mixing consoles!
DMX cables enable trouble-free operation and the highest possible transmission reliability
of signal data. Do not use microphone cables!
Hint! (Condensation)
To avoid condensation in the unit, the unit should adapt to the ambient temperature
before commissioning.
Hint! (Unwanted odours)
A new product can sometimes lead to unwanted odours. This reaction is normal and
disappears after a few minutes.