Ebode HD300PL Bedienungsanleitung Seite 4

6.1 HDMI Extender Transmitter
Data transmission led
Connection led
Reset
Power input
IR blaster extension
cable interface
HDMI output
HDMI input
6.2 HDMI Extender Receiver
Data transmission led
Connection led
Reset
Power input
IR receiver extension cable
interface
HDMI output
2-3-2016
Led blinks slowly when it is connecting
Led blinks fast when it is successfully connected and
transmitting data.
Led blinks to indicate a working circuit connection
Press reset button to restart the device
Connect with AC100~240V power line
Connect with IR blaster extension cable. Put the IR sender
head close to IR window of the source device and keep
them at the same horizontal line.
Connect with HDMI display device
Connect with HDMI source device
Led blinks slowly when it is building connection.
Led blinks fast when it is successfully connected and
transmitting data.
Led blinks to indicate a working circuit connection
Press reset button to restart the device
Connect with AC100~240V power line
Connect with IR receiver extension cable.Aim the
remote control to IR receiver head and keep the
distance within the required range of the IR
receiver.
Connect with HDMI display device
4 ebode HD300PL