•
For Gaia model : take away the radiant plate, the little clap for tank and the oven plane,
( Fig.9), now You can reach every part of the exhaust fumes that should be cleaned .
•
Aurora : take away the radiant plate, than lift and remove the oven structure, employing
the little brush ( accessories enclosed ) clean the equipment sides from combustion
residuals and ash (Fig. 10).
•
Employing brush, vacuum-cleaner, and shovel, clean the equipment on the inside parts
from combustion residuals. After cleaning operations, all the equipment parts should be
assembled again rightly.
•
Attention : during reassemble phase, make attention to the sense of direction of oven's
wrinkles. ( Fig.11)
•
We recommend to check always, for an eventual cleaning, the connection tubes between
the equipment and the flue
Fig. 11
Fig.11 Oven : The oven's wrinkles
should turn towards the high
37/96
IT-GB-FR-ES-DE mod. 138