Switching Between Person or Object First determine
whether you want to measure the temperature of a
person or an object.
1.
Press the Power button " " to turn on the
thermometer.
2.
To switch between the measurement modes for a
person or an object, press the 'Mode' button.
The " " symbol appears to measure a person and
the "
" symbol appears to measure an object.
switching between fahrenheit or Celsius
1.
Press the Power button " " turn the thermometer on.
2.
Press and hold both the 'Mode' and 'Memory' buttons
for approximately 3 seconds. This will change the
mode to either °C or °F. Once the thermometer beeps,
the unit is ready for measurement.
NotE: To switch the mode again,
wait until the unit beeps and then
press and hold both the 'Mode' and
'Memory' buttons until the mode
switches to either °C or °F.
Rev.4 02-2013
4.ChANgINg moDEs
MODE BUTTON
MEMORY BUTTON