10. tRoublEshootINg
1. Consistent low temperature readings
•
Perhaps the lens is not positioned properly. Ensure
the device is being used correctly. (see "To take a
temperature")
•
The Measurement Sensor or Lens may be dirty and
require cleaning. Thoroughly clean the lens with a
piece of soft, alcohol-moistened cotton cloth. (See
"Storage and Cleaning" )
•
Please be aware that the device may record lower re-
adings when the object or patient's forehead is damp,
wet or perspiring.
2. the device cannot operate
•
When battery power is too low, the device will not ope-
rate properly. Replace the batteries as appropriate.
11. ApplIED stANDARDs
This product conforms to the provisions of the EC direc-
tive MDD (93/42/EEC). The following standards apply to
the design and/or manufacture of the products:
ASTM E 1965-98
EN 980: 2008
IEC/EN 60601-1
IEC/EN 60601-1-2
ISO 14971
2265
Rev.4 02-2013
Type BF Equipment