Motorola H500 Bedienungsanleitung Seite 9

H500_CFJN1688A.qxp 19/07/2005 14:34 Page 6
English
The device ID is now stored in the phone's memory. Pairing is successful
when the headset indicator flashes rapidly.
After you have successfully paired your phone and headset, you do not
need to repeat these steps each time you use the headset.
Paired link to additional devices
Your headset can store pairing information for up to 8 different devices
equipped with Bluetooth wireless technology. Devices are stored in a
"Paired Device List" in memory in chronological order. When an attempt to
pair to more than 8 devices is made, the oldest paired device is removed
from the list.
The headset will automatically initiate a connection with the last device it
was connected to either by powering up the headset or by pressing the Call
button. If you want to connect the headset to another device in the paired
device list, you must initiate the connection from that device. Whichever of
the 8 devices initiates a connection to the headset afterwards, that device
then becomes the "last connected" device.
Test and use
Your phone and headset are now paired and ready to make and receive
calls. To confirm they are successfully paired and operating properly, make a
call from you phone. You will hear ringing from the headset.
6