Indicator Lights - Motorola H500 Bedienungsanleitung

H500_CFJN1688A.qxp
English
Join a 3 way call (note: feature is
phone/network dependent*)
Disable or enable the indicator light
Mute or un-mute a call
(*) Phone and service plan must support 3-way calling and call waiting to
utilize the functions associated with these features.

Indicator lights

The indicator light provides information about your headset status.
With the charger plugged in:
Headset indicator
On (steady)
Off
With no charger plugged in:
Headset indicator
Off
On (steady)
10 rapid flashes
Quick flash
Slow pulse
Note: after 5 minutes of inactivity, the light stop flashing to conserver power,
but the headset is in standby mode. Any button press on the headset will re-
awaken the headset and the flashing resumes.
8
19/07/2005
Press and hold both volume buttons
Press and hold both volume button for 3 to 4
seconds
Tap both Volume buttons
Headset status
Charge in progress
Charging complete
Headset status
Power off
Pairing mode
Pairing successful
Standby (not on a call)
Connected (on a call)
14:34 Page 8