Motorola H500 Bedienungsanleitung Seite 8

H500_CFJN1688A.qxp
Wearing the headset
You can wear your H500 headset on your left of right ear. The headset
comes ready for the right ear.
Placing the headset on your ear: refer to figure 3 on page 2
Placing the headset on the left ear: refer to figure 4 on page 2
• Open the earhook 90°
• Detach the earhook from the hinge pin.
Changing volume button orientation
If you change your headset to wear it on the other ear, you can also change
the orientation of the volume buttons.
1 Turn the headset power off
2 Press the Call button and the volume button you want to assign as the
"volume" up button until the indicator light flashes twice.
The headset power turns on.
Pairing your headset and phone
Your phone's Bluetooth feature is off by default. Make sure the Bluetooth
feature is turned on in your phone. If the Bluetooth feature was turned off or
was turned on temporarily, you may need to restart the Bluetooth feature.
Please check your phone's user's guide.
Before you can use your headset, you must pair (link) it with your phone.
1. With the headset power off, press and hold the Call button for 5 seconds
until the indicator light turns on and remain steadily lit.
If the indicator light is flashing or does not remain steadily lit, turn off the
headset and repeat this step.
2. Perform a device discovery (or scan) from the phone. For details about
device discovery, consult your phone's user's guide. The phone lists
Bluetooth devices it finds.
3. Select Motorola H500 in the list of discovered devices and confirm by
following the on-screen prompts.
4. When prompted by the phone, enter the passkey 0000 and confirm.
19/07/2005 14:34 Page 5
English
5