Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English illustra 625PTZ Dome
a
Drill four 3.2mm (1/8in) holes for mounting screws.
b
Drill one 19.5mm (3/4) hold for cable access.
c
Place the washer onto the screws and insert them into the wood, sequentially tighten
the screws to secure the base.
d
Feed the cables through the access hole.
5
If using the Feature Plus option connect the Alarm and Audio cables to the spring loaded
contacts on the base of the dome.
The Audio Output and Microphone cables shall be shielded and shall not be longer than 30m.
Alarm and Audio (Available on the Feature Plus version only)
Pin#
1
2
3
4
5
6
7
8
9
10
6
Terminate the power and network cable using the provided connectors.
Power AC
7
Connect the LAN and power cables.
4
Designation
Relay NO (Normally Open)
Relay C (Common)
Relay NC (Normally Closed)
GND
-
-
GND
GND
-
-
Pin#
1
24Vac
2
-
3
24Vac
Pin#
11
12
13
14
15
16
17
18
19
20
3 Wire AC Supply
Designation
Alarm IN #1 (Active Low)
GND
Alarm IN #2 (Active Low)
Alarm IN #3 (Active Low)
MIC BIAS (4.5V 2mA)
Alarm IN #4 (Active Low)
MIC Input
Audio Output
Audio GND*
Audio GND*
Quick Reference Guide
Werbung
Inhaltsverzeichnis
