Volume Adjustment Mode; Dual Control Head - Motorola MTM800 Enhanced TETRA Bedienungsanleitung

Volume Adjustment Mode

The Service Provider can enable Volume Adjustment Mode feature.
All the settings regarding Individual mode are adjustable and
retained even if the user switches back to Common mode.
In Common mode the user adjusts all the Volumes at the same
time.
To change the volume setting or settings, press Menu > Setup
> Set Volume.

Dual Control Head

The Dual Control Head feature allows you to have two Control
Heads: Master and Slave, which have the same functionality.
Both Control Heads are turned on independently. To turn on any of
the Control Heads:
• Press and hold On-Off/End/Home Key.
• Press and hold the Rotary knob to turn the MTM800 Enhanced.
Master and Slave Interaction
Master Control Head checks if there is a link between Master and
Slave Control Heads. When there is no connection the icon
displayed, otherwise the display shows
available for this feature go to D-PTT Tones on page 21.
If this feature is enabled by your Service Provider, one of the icons
is displayed all the time.
If only Slave Control Head is powered on and the Master Control
Head is unavailable, it enters Standalone Mode and only
can be pressed to turn it of.
Key Pressed
If any key except Emergency button and
Control Head, the icon
on the other Control Head.
At any time Emergency button and
Control Heads.
. To see all the icons
is pressed on any
is displayed and all the keys are blocked
can be pressed on both
is
button
13